The use of the wood plastic terrace
Issue Time:2012-04-24

Known as the metal coating combined with two different kinds of high temperature.wpc outdoor furniture and pressure metal with the kinds of process. This process is forced by the metal mold by the metal press table or roll together. Steel and aluminum are the most commonly used metal for cladding. Sometimes, tin, titanium, copper and copper may be used. The choice of metal depends on whichit is the purpose to be used. The standard choice of metal is its durability, cost effectiveness, appearance, and purpose. For example, if the program is to use construction land, and cladding for metal, because they are sturdy and durable steel or aluminum

Composite cladding
Has a coefficient of thermal expansion of less than 9% per degree Celsius ppm use in composite metal cladding. For composite cladding temperature in the range of 20 degrees Celsius to 100 degrees Celsius. In the core material of this method is to wear, with a transition metal or alloy. Should cover at least a core layer in the composite cladding cladding metal or alloy. The most common use of the composite cladding for walls and roofs of steel.

Profiled cladding
Profiled cladding or personal information plastic sheeting.wood plastic terrace has been widely used in industrial buildings over the years. For the contours of plastic sheeting, metal, steel or aluminum. This type of cladding need an insulated roof and walls. This type of cladding to achieve greater thermal movement and corrosion resistance. It also has the durability and toughness, and continued for many years. The cladding is impervious, it does not allow the infiltration of water.

Cassette panel Cladding
Card-panel cladding is formed on the wall edge of the rectangle. They are from the metal plate to form a multilayer pressed together to provide the stiffness of the panel. Metal cladding by the brake pressing. This involves folding a flat piece of metal. These tables can be to the rear panel of the rail additional stiffness of the solder fillet. Cassette panel cladding depending on certain factors is the use of metal plate, manufacturing requirements and restrictions on size.

Application
The most common and widely used in metal plating as a filler material in the manufacture of a cheap metal coins. Electroplating, gluing or welding principle and the method it uses, this method should not be confused, they are completely different. Metal cladding, more durable, heavier than plating. In general, composite wall cladding there are three types: composite metal cladding, profiled and tape